Andover Norton International Ltd 
Unit 4 Brunel Gate
Portway West Business Park
Andover, Hants. SP10 3SL
England
Tel.(0044)(0)1264-359565
Fax (0044)(0)1264-748409
e-mail office@andover-norton.co.uk
The exclusive Source of all  Genuine Norton Commando 
and Norton Dominator Factory Spare Parts

Norton Service Tools

Commandos are relatively easy to work on; however, some special tools are needed in order to do the job properly without causing damage to the components involved. The following tools are currently available (click on picture of tool to read more):

03-0449 Dommi Clutch Extractor	no picture yet
06-0949 Auto Advance Lockwasher
06-0999 Clutch Spring Compressor
06-1015 Clutch Lock Tool, Commando 06-7227 A similar tool for Dominator/Singles clutches
06-1359 Contact Breaker Oil Seal Tool This was originally part of the tool kit that came with a new Commando.
06-3964 Valve Guide Extractor and Inserter
06-3965 Peg Spanner for Wheel Bearing Lockring and Brake Caliper End Plug
06-3968 Exhaust Pipe Lockring Spanner
06-3970 Main Bearing Race Extractor
06-3971 Isolastic Buffer Assembly Tool
06-4292 Oil seal drift set comprises 3 pieces - two "ends" and a handle. Fits both seals in the timing cover, crankshaft as well as the contact breaker.
06-4297 Engine Sprocket/Clutch Hub/Cam Sprocket Puller
06-4298 Slide Hammer for Rocker Spindles and Auto Advance Unit
06-4622 Strap Wrench
06-7245 Tool for Primary Chaincase Inspection Caps (Commando). Shown are 3 tools and 2 caps- what you get is just one tool (sorry!)
06-7524 Timing Pinion Extractor
06-7624 Box Spanner for Gearbox Sprocket Nut and Crankcase Filter. Sizes 7/8" x 3/4" Whitworth.
NM23441 Gearbox Lockring Tool. Tool of our own design to open and tighten the gearbox lockring without damaging it.